Differences

This shows you the differences between two versions of the page.

--- informatica:linux:fax:configuracion_inicial_hylafax [2008/12/02 10:13] – 194.179.83.89
+++ informatica:linux:fax:configuracion_inicial_hylafax [2009/05/15 08:55] – borrado 194.179.83.89
@@ Line 1: / Line 1: @@
-. aptitude install hylafax server
-. faxsetup
-  ...
-  Warning: /etc/hylafax/getty-link does not exist or is not an executable program!
-  ...
-  Warning: /etc/hylafax/vgetty-link does not exist or is not an executable program!
-  ...
-  Warning: /etc/hylafax/egetty-link does not exist or is not an executable program!
-  ...
-Are these ok [yes]? => y\\
-Can I terminate this faxq process (7586) [yes]?  y\\
-Should I restart the HylaFAX server processes [yes]? y\\
-Do you want to run faxaddmodem to configure a modem [yes]? y\\
-Serial port that modem is connected to [ttyS0]? ttyS0\\
-Country code [1]? 34\\
-Area code [415]? 415\\
-Phone number of fax modem [+1.999.555.1212]? 600600600\\
-Local identification string (for TSI/CIG) ["NothingSetup"]? pcmalaga\\
-Long distance dialing prefix [1]? 34\\
-International dialing prefix [011]? 011\\
-Dial string rules file (relative to /var/spool/hylafax) [etc/dialrules]? etc/dialrules\\
-Tracing during normal server operation [1]? 1\\
-Tracing during send and receive sessions [11]? 11\\
-Protection mode for received facsimile [0600]? 0644\\
-Protection mode for session logs [0600]? 0600\\
-Protection mode for ttyS0 [0600]? 0600\\
-Rings to wait before answering [1]? 5\\
-Modem speaker volume [off]? off\\
-Command line arguments to getty program ["-h %l dx_%s"]? "-h %l dx_%s"\\
-Pathname of TSI access control list file (relative to /var/spool/hylafax) [""]? ""\\
-Pathname of Caller-ID access control list file (relative to /var/spool/hylafax) [""]? ""\\
-Tag line font file (relative to /var/spool/hylafax) [etc/lutRS18.pcf]? etc/lutRS18.pcf\\
-Tag line format string ["From %%l|%c|Page %%P of %%T"]? "Desde %%l|%c|Pagina %%P de %%T"\\
-Time before purging a stale UUCP lock file (secs) [30]? 30\\
-Hold UUCP lockfile during inbound data calls [Yes]? y\\
-Hold UUCP lockfile during inbound voice calls [Yes]? y\\
-Percent good lines to accept during copy quality checking [95]? 95\\
-Max consecutive bad lines to accept during copy quality checking [5]? 5\\
-Max number of pages to accept in a received facsimile [25]? 25\\
-Syslog facility name for ServerTracing messages [daemon]? daemon\\
-Set UID to 0 to manipulate CLOCAL [""]? => Pulso 'enter'\\
-Use available priority job scheduling mechanism [""]?  => Pulso 'enter'
-  CountryCode:    34
-  AreaCode:    415
-  FAXNumber:    600600600
-  LongDistancePrefix:  34
-  InternationalPrefix:  011
-  DialStringRules:  etc/dialrules
-  SessionTracing:    11
-  RecvFileMode:    0644
-  RingsBeforeAnswer:  5
-  SpeakerVolume:    off
-  GettyArgs:    "-h %l dx_%s"
-  LocalIdentifier:  pcmalaga
-  TagLineFont:    etc/lutRS18.pcf
-  TagLineFormat:    "Desde %%l|%c|Pagina %%P de %%T"
-  MaxRecvPages:    25
-  LockDataCalls:    yes
-  LockVoiceCalls:    yes
-Are these ok [yes]? y
-How should it be configured [1]? 1
-DTE-DCE flow control scheme [default]?  default
-  ModemDialCmd:    ATDT%s
-  ModemFlowControl:  rtscts
-  ModemHardFlowCmd:  AT&K3
-  ModemMfrQueryCmd:  !Rockwell
-  ModemModelQueryCmd:  !RC288DPi
-  ModemNoFlowCmd:    AT&K0
-  ModemRate:    19200
-  ModemRevQueryCmd:  ATI3
-  ModemSetupDCDCmd:  AT&C1
-  ModemSetupDTRCmd:  AT&D2
-  ModemSoftFlowCmd:  AT&K4
-Are these ok [yes]? y
-  CountryCode:    34
-  AreaCode:    415
-  LongDistancePrefix:  34
-  InternationalPrefix:  011
-  DialStringRules:  etc/dialrules
-Are these ok [yes]? y
-Do you want to run faxaddmodem to configure another modem [yes]? n
-Should I run faxmodem for each configured modem [yes]? y