Subimos el firmware al directorio tmp:

sysupgrade -n /tmp/Hotspot1-sysupgrade.bin

Muestra cambios sin grabar:

uci changes

Los graba y aplica cambios:

uci commit
reload_config

Enchufar POE puerto uno y cable al PC. La omnitik tiene la ip 192.168.88.1

Cambiaos la IP:

uci set network.lan.ifname='eth0'
uci delete network.lan.type
uci set network.lan.ipaddr='192.168.1.11'
uci set network.lan.netmask='255.255.255.0'
uci set network.lan.gateway='192.168.1.1'
uci set network.lan.dns='8.8.8.8'
uci commit
reload_config