Differences

This shows you the differences between two versions of the page.

--- informatica:linux:vagrant [2020/04/08 07:26] – [It appears your machine doesn't support NFS, or there is not an] javi
+++ informatica:linux:vagrant [2020/05/22 10:20] (current) – [Desinstalar por completo KVM + libvirt + vagrant] javi
@@ Line 182: / Line 182: @@
   sudo rm -fr /etc/apparmor.d/libvirt/
   sudo rm -fr /var/run/libvirt/
-  rm -fr /home/kdu/.config/libvirt
+  rm -fr ~/.config/libvirt
-  sudo rm -fr /home/my_user/.vagrant*
+  sudo rm -fr ~/.vagrant*
   sudo rm -fr /tmp/.vagrant*
-  sudo rm -fr /home/my_user/.cache/libvirt
+  sudo rm -fr ~/.cache/libvirt
 Uninstalling Vagrant
@@ Line 196: / Line 196: @@
   sudo ip link set virbr1 down
   sudo brctl delbr virbr1
+===== Cambiar rango IPs de libvirt =====
+  /etc/libvirt/qemu/networks/vagrant-libvirt.xml
+        before
+<code>
+<network ipv6='yes'>
+  <name>vagrant-libvirt</name>
+  <uuid>f9dd4e87-b07e-4722-a8a4-bd2b7bcd8aa5</uuid>
+  <forward mode='nat'/>
+  <bridge name='virbr1' stp='on' delay='0'/>
+  <mac address='52:54:00:41:40:ca'/>
+  <ip address='192.168.121.1' netmask='255.255.255.0'>
+    <dhcp>
+      <range start='192.168.121.1' end='192.168.121.254'/>
+    </dhcp>
+  </ip>
+</network>
+</code>
+  sudo virsh net-edit vagrant-libvirt
+<code>
+<network ipv6='yes'>
+  <name>vagrant-libvirt</name>
+  <uuid>f9dd4e87-b07e-4722-a8a4-bd2b7bcd8aa5</uuid>
+  <forward mode='nat'/>
+  <bridge name='virbr1' stp='on' delay='0'/>
+  <mac address='52:54:00:41:40:ca'/>
+  <ip address='10.151.0.1' netmask='255.255.255.0'>
+    <dhcp>
+      <range start='10.151.0.1' end='10.151.0.254'/>
+    </dhcp>
+  </ip>
+</network>
+</code>
+  sudo service libvirtd stop
+  sudo ifconfig virbr1 down
+  sudo ip link set virbr1 down
+  sudo brctl delbr virbr1
+  sudo service libvirtd start
+Bridge was NOT created...
+Solution: start the network
+  sudo virsh net-start vagrant-libvirt
+If still issues, try to stop/start the libvirt network:
+  sudo virsh net-destroy vagrant-libvirt
+  sudo virsh net-start vagrant-libvirt
+Then check editing it:
+  sudo virsh net-edit vagrant-libvirt
 ===== Errores =====
@@ Line 340: / Line 401: @@
   vagrant up