Differences

This shows you the differences between two versions of the page.

--- informatica:arduino:arduino_cli [2021/02/05 20:14] – created jose
+++ informatica:arduino:arduino_cli [2021/02/08 20:26] (current) – jose
@@ Line 3: / Line 3: @@
 curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | sh
+<code>
 arduino-cli help core
 arduino-cli core update-index
 arduino-cli board list
 arduino-cli core install arduino:avr
+</code>
-$ arduino-cli board list
+  $ arduino-cli board list
+<code>
 Port         Type              Board Name                FQBN             Core
 /dev/ttyACM0 Serial Port (USB) Arduino Mega or Mega 2560 arduino:avr:mega arduino:avr
 /dev/ttyAMA0 Serial Port       Unknown
+</code>
 Buscamos la biblioteca:
-arduino-cli lib search dht
+  arduino-cli lib search dht
-pi@raspberrypi:~/arduino $ arduino-cli lib install "DHT sensor library"
+  arduino-cli lib install "DHT sensor library"
 Instala las dependencias
 Desde el directorio donde tenemos el ino:
-# arduino-cli compile
+  arduino-cli compile
+<code>
 arduino-cli compile -b arduino:avr:mega
 Sketch uses 7182 bytes (2%) of program storage space. Maximum is 253952 bytes.
 Global variables use 261 bytes (3%) of dynamic memory, leaving 7931 bytes for local variables. Maximum is 8192 bytes.
+</code>
 Una vez compilado lo subimos
-# arduino-cli  upload -b arduino:avr:mega -p /dev/ttyACM0
+  arduino-cli  upload -b arduino:avr:mega -p /dev/ttyACM0