====== Crear Màquina ======

Crear dues interfícies de xarxa:
  bridged mode vmbr0
  bridged mode vmbr1

Configurar xarxa:
  auto eth0
  iface eth0 inet static
  	address 192.168.1.101
  	netmask 255.255.255.0
  	gateway 192.168.1.1
  
  auto eth1
  iface eth1 inet static
  	address 10.139.67.101
  	netmask 255.255.255.224
  	up route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.139.67.97

====== Arrancar máquina ======

===== Listar las máquina =====

  # vzlist -a

      CTID      NPROC STATUS    IP_ADDR         HOSTNAME
       100          - stopped   -               porta.escorxador.matarosensefils.net
       101         43 running   -               web1escp.matarosensefils.net
       102         15 running   -               mld1escp.matarosensefils.net
       103          - stopped   -               vpn1.esc1.matarosensefils.net
       104          - stopped   -               ldap1.escorxador.matarosensefils.net

===== Arrancar una máquina =====
  # vzctl start 103

<code>
Starting container ...
Container is mounted
Setting CPU units: 1000
Setting CPUs: 1
Setting devices
Configure veth devices: veth103.0 veth103.1 
Adding interface veth103.0 to bridge vmbr0 on CT0 for CT103
Adding interface veth103.1 to bridge vmbr1 on CT0 for CT103
Container start in progress...
</code>

Conectarse a la máquina
  # vzctl enter 103

  entered into CT 103
  
**Ficheros de configuración:** /etc/vz/conf

===== Montar recurso =====
Si tenemos un recurso montado en el host, por ejemplo **/mnt/sdc/datos/mldonkey** y lo queremos montar en **/mnt/mldonkey/** de la máquina 103

/etc/vz/conf/103.mount

  #!/bin/bash
  if [ ! -e /var/lib/vz/root/103/mnt/mldonkey ]; then mkdir -p /var/lib/vz/root/103/mnt/mldonkey; fi
  mount -n -t simfs /mnt/mldonkey/ /var/lib/vz/root/103/mnt/mldonkey/ -o /mnt/sdc/datos/mldonkey