Crear dues interfícies de xarxa:

bridged mode vmbr0
bridged mode vmbr1

Configurar xarxa:

auto eth0
iface eth0 inet static
	address 192.168.1.101
	netmask 255.255.255.0
	gateway 192.168.1.1

auto eth1
iface eth1 inet static
	address 10.139.67.101
	netmask 255.255.255.224
	up route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.139.67.97

# vzlist -a

    CTID      NPROC STATUS    IP_ADDR         HOSTNAME
     100          - stopped   -               porta.escorxador.matarosensefils.net
     101         43 running   -               web1escp.matarosensefils.net
     102         15 running   -               mld1escp.matarosensefils.net
     103          - stopped   -               vpn1.esc1.matarosensefils.net
     104          - stopped   -               ldap1.escorxador.matarosensefils.net

# vzctl start 103

Starting container ...
Container is mounted
Setting CPU units: 1000
Setting CPUs: 1
Setting devices
Configure veth devices: veth103.0 veth103.1 
Adding interface veth103.0 to bridge vmbr0 on CT0 for CT103
Adding interface veth103.1 to bridge vmbr1 on CT0 for CT103
Container start in progress...

Conectarse a la máquina

# vzctl enter 103

entered into CT 103

Ficheros de configuración: /etc/vz/conf

Si tenemos un recurso montado en el host, por ejemplo /mnt/sdc/datos/mldonkey y lo queremos montar en /mnt/mldonkey/ de la máquina 103

/etc/vz/conf/103.mount

#!/bin/bash
if [ ! -e /var/lib/vz/root/103/mnt/mldonkey ]; then mkdir -p /var/lib/vz/root/103/mnt/mldonkey; fi
mount -n -t simfs /mnt/mldonkey/ /var/lib/vz/root/103/mnt/mldonkey/ -o /mnt/sdc/datos/mldonkey